Sprinkler repair, permitted irrigation installation and drainage in Frisco, Texas — and a plain explanation of the city’s four-season watering rules.
Frisco runs four watering seasons, not two, and the one that surprises people is winter. From 1 November to 31 March the city does not permit turf watering by spray or rotor at all — drip only, and a maximum of two hours a day if the weather genuinely warrants it. Every winter we get calls from homeowners who did not know, and from a few who found out through the enforcement letter.
Spring and autumn are one day a week on your bin collection day. Summer is that day plus one designated second day. Between 10am and 6pm nothing runs. Fines start at a hundred dollars and climb, though a first residential penalty can be waived by taking a free city sprinkler checkup — the city employs its own licensed irrigators and does several thousand of those a year.
Frisco also requires a permit for new systems, alterations, additions and repairs, with backflow approved before an irrigation inspection can be booked, and annual backflow testing by a tester registered with the city. Practically, that means a Frisco job has paperwork attached that the same job in a neighbouring city does not. Worth knowing before someone quotes you a suspiciously quick price.
Request an estimate
Frisco has the tightest irrigation rules of any city we work in — four separate watering seasons, permits for repairs as well as installs, and a winter ban most homeowners do not know about.
The single most common compliance problem here. A controller left on its autumn programme will keep watering turf through November, which the city does not allow. We reprogramme for the season rather than switching the system off and forgetting it.
Frisco permits repairs, not just installations. Work done without one can complicate a later inspection or a house sale. We pull what the job needs.
Frisco has almost no pre-1990 housing, so the work here is a generation of early-2000s builder installs all reaching the same failures at once — solenoids, controllers and worn nozzles.
The city publishes its own figure: local clay absorbs about a tenth of an inch an hour. Any zone running longer than that in one go is watering the pavement. Splitting run times fixes it without new hardware.
Frisco is a member city of the North Texas Municipal Water District. The city runs four watering seasons: one day a week on your collection day in spring and autumn, that day plus a designated second day in summer, and no turf watering by spray or rotor at all between 1 November and 31 March. Nothing runs between 10am and 6pm. Permits are required for installations, alterations, additions and repairs, and backflow devices must be tested annually by a tester registered with the city. Frisco publishes a local clay infiltration rate of about 0.10 inches per hour, which is why cycle-and-soak matters so much here.
Under Texas Commission on Environmental Quality rules, selling, designing, installing, altering, repairing or servicing an irrigation system requires a TCEQ licence. Ask any contractor for their license number before work begins — in Frisco as anywhere else in Texas.
Loads an interactive map from Google. Nothing is requested from Google until you tap it.
Leaks, broken heads, valves, wiring and controllers.
Learn more →New systems designed zone by zone for your property.
Learn more →French drains and grading that move water off the slab.
Learn more →Protect pipes, valves and backflow before a hard freeze.
Learn more →Already a customer? Submit a service or warranty request →
Tell us what the system is doing and we’ll get you scheduled.
Tell us about your property in Frisco and what the system is doing. We’ll follow up to discuss next steps.
Prefer to talk? Call (972) 240-8082, Monday to Friday, 8:00 AM to 5:00 PM.